High Performance

SC9100 System 100 VOC DTM Epoxy Mastic


Click to Enlarge

White
254157

Select a Color (8)

  • Colours :

  • Tint Bases :

  • Activators :

About SC9100 System 100 VOC DTM Epoxy Mastic

This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of ultra-low-VOC Rust-Oleum High Performance SC9100 System 100 VOC DTM Epoxy Mastic is equal to multiple coats of competitive epoxy. VOC-compliant nationwide.

  • Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
  • Superior long-term resistance to solvents, chemicals, abrasion and impact
  • Convenient 1:1 mixing ratio – no measuring required
  • Two-year rust-proof guarantee—maximum corrosion protection
  • Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; 100 VOCs


ACTIVATORS:


Standard Activator

  • For air and surface temps of 10-38°C (50-100°F)

Immersion Activator

  • For fresh or salt water immersion of steel or concrete where water temps do not exceed 52°C (125°F)
  • Produces slightly lower gloss than standard activator
  • not for use in potable water tanks

For Best Results

  • This is a two-component system—order base colour and activator separately.

Available Sizes

  • 3.7 L
  • 18.9 L

About SC9100 System 100 VOC DTM Epoxy Mastic

This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of ultra-low-VOC Rust-Oleum High Performance SC9100 System 100 VOC DTM Epoxy Mastic is equal to multiple coats of competitive epoxy. VOC-compliant nationwide.

  • Direct-to-metal (DTM) self priming formula—adheres to a variety of substrates
  • Superior long-term resistance to solvents, chemicals, abrasion and impact
  • Convenient 1:1 mixing ratio – no measuring required
  • Two-year rust-proof guarantee—maximum corrosion protection
  • Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; 100 VOCs


ACTIVATORS:


Standard Activator

  • For air and surface temps of 10-38°C (50-100°F)

Immersion Activator

  • For fresh or salt water immersion of steel or concrete where water temps do not exceed 52°C (125°F)
  • Produces slightly lower gloss than standard activator
  • not for use in potable water tanks

For Best Results

  • This is a two-component system—order base colour and activator separately.

Available Sizes

  • 3.7 L
  • 18.9 L



SKU
Color
UPC
Safety Data Sheets (SDS)
note: To view the SDS or TDS you need to have the Acrobat Reader Software.
Technical Support
Technical Support Number