Rust-Oleum Projects
Glitter Charger
Browse Projects
-
Glitter Spray Painted Pumpkins -
Happy Holidays Glitter Wreath
-
Estimated Time
1 Hour
-
Challenge Level
Easy
-
Tools & Supplies
-
Specialty Glitter Clear Sealer
-
Drop Cloth or Kraft Paper
-
Charger Plates
-
Lint-free cloth
-
Gloves
- PREPARE: Always work in a well ventilated area and cover nearby items with drop cloths to protect them from overspray. Wipe down the outside of the charger using a lint free cloth.
- TAPE: Use painters tape to create a striped pattern on the charger
- PAINT: Hold your can of Glitter spray paint 10-12” from the charger and begin spraying the surface in a steady back-and-forth motion, slightly overlapping each stroke. Apply 3 or more light coats at a moderate speed. For best results, apply multiple light coats instead of one heavy coat. Let the glitter dry for about 20 minutes, then topcoat the charger with Glitter Clear Sealer. For best results, apply 2 or more light coats.
- FINISH: Let charger dry for at least 1 hour before using. Remove painters tape and proudly display your glitter chargers on your table at your next dinner party!